Project case

Design Study

Milan 190 sqm Kitchen Bath Apartment

This 190 sqm Milan apartment study uses Fadior 304 stainless steel to connect kitchen, bath vanity, wardrobe, and storage wall planning through four wet-dry room zones, and a 30-year cabinet-body structural warranty (terms per contract).

Design study: a proposed direction, not a verified delivered home.

Chen KaiArchitectural Systems Lead

Reviewed by

Lin YueSenior Materials Editor

Published May 5, 2026Reviewed May 5, 2026

ApartmentMilan, ItalyProposed: 190 sqm

Design intent

For the owner, the benefit is easier long-term living. Cookware, towels, grooming tools, dining pieces, and seasonal storage all have planned homes, while visible surfaces stay calm enough for guests and daily family routines.

Fadior stainless steel collections Discuss a similar project

Fadior builds custom cabinetry for export; see our China kitchen cabinet manufacturing page. Take a look inside our stainless steel cabinet factory.

What does Milan 190 sqm Kitchen Bath Apartment explore as a Fadior design study?

Milan 190 sqm Kitchen Bath Apartment is presented as a design study for a Apartment in Milan, Italy across 190 sqm, not as a verified delivered home. The study responds to this planning challenge: The 190 sqm Milan apartment has to make kitchen, bath vanity, storage wall, and wardrobe thresholds feel connected without turning every room into the same surface. The proposed design response is: Fadior answers with a 304 stainless steel performance layer where water, heat, and repeated handling are most demanding. The intended design outcome is described as: For the owner, the benefit is easier long-term living. Cookware, towels, grooming tools, dining pieces, and seasonal storage all have planned homes, while visible surfaces stay calm enough for guests and daily family routines. These statements describe design intent and specification planning; they do not establish manufacture, installation, handover, or lived performance.

Project requirements

The brief, proposed design response, and intended outcome behind this design study.

Who it's for

Who this specification is for.

Designed for a globally mobile apartment owner, this 190 sqm project suits a residence where kitchen, bath vanity, wardrobe, dining, and storage walls must feel coordinated without becoming visually flat. The buyer needs transferable specification logic, warm finishes, and durable wet-zone performance. It fits a premium planning tier where one apartment needs kitchen, bath, wardrobe, and storage decisions to be reviewed together before fabrication, shipping, and installation.

Material spec

Proposed material specification.

Recorded concept parameters; they do not verify manufacture, installation, or measured performance.

Steel grade: 304
Standards referenced: ASTM A240NSF/ANSI 51HACCPISO 14001GREENGUARD Gold
Finishes: brushedwarm champagnematte taupewalnut pairing

Key dimensions

Proposed project parameters.

Concept area only; delivery and measured performance require separate evidence.

190m²

Proposed area

Challenge

Why A Milan Apartment Needed Wet-Dry Room Continuity

The 190 sqm Milan apartment has to make kitchen, bath vanity, storage wall, and wardrobe thresholds feel connected without turning every room into the same surface. The design problem is continuity with hierarchy, because wet work, grooming, dining, and storage carry different service loads.

A copied default-area apartment formula would miss the real issue. The owner is coordinating multiple rooms, likely across changing sites or future residences, so the specification has to separate transferable system logic from details that should remain local to each installation.

The kitchen is the heaviest daily-use room, but the bath vanity and wardrobe corridor also handle water, touch, towels, beauty tools, and repeated cleaning. If those secondary spaces are under-specified, the apartment loses coherence after the first year of use. This keeps the case specific enough for approval, procurement, installation, and later service review.

Fadior frames the case around four practical zones: cooking and wet prep, dining service, vanity care, and wall-storage continuity. Each zone has its own performance requirement, which prevents the article from pretending one decorative wall panel can solve the whole home. This keeps the case specific enough for approval, procurement, installation, and later service review.

The main risk is visual sameness. Unified design can become monotonous if every plane uses the same finish, but it can also become fragmented if each room chooses its own material story. The project needs a controlled finish family with clear functional separation.

Gallery

Milan 190 sqm Kitchen Bath Apartment — project gallery and key details.

This image set illustrates the proposed layout, finish continuity, and material direction for a design study.

Solution

Fadior 304 Planning For A 190 sqm Kitchen Bath System

Fadior answers with a 304 stainless steel performance layer where water, heat, and repeated handling are most demanding. The kitchen sink, prep edge, vanity base, and high-touch storage zones get durable logic, while warmer panels keep the public apartment tone calm. That gives the specification team concrete details for fabrication, coordination, cleaning, and future service.

The kitchen island is planned as the shared service point for cooking, plating, and informal meals. It connects to a tall storage wall that can absorb pantry stock, small appliances, tableware, towels, and overflow pieces without making the apartment feel like a utility corridor.

The bath vanity uses the same proportion language but not the same working detail. Moisture control, cleaning clearance, basin support, mirror storage, and towel access are treated as vanity-specific decisions, so the secondary room earns its place in the specification. That gives the specification team concrete details for fabrication, coordination, cleaning, and future service.

A warm champagne, matte taupe, and walnut finish family softens the stainless core. This keeps the Milan apartment adaptable across different sites while avoiding a cold showroom result, especially where dining chairs, wardrobe doors, and vanity lighting are visible together. That gives the specification team concrete details for fabrication, coordination, cleaning, and future service.

Specification targets stay clear: 304 stainless steel panel planning, planned drawer-load storage, Blum hardware, food-contact standards for kitchen surfaces, and service access assumptions for bath and wardrobe zones before fabrication approval begins. That gives the specification team concrete details for fabrication, coordination, cleaning, and future service.

The specification team has concrete details for fabrication, coordination, cleaning, and future service.

Design intent

A Unified Apartment Case With Its Own Specification Logic

For maintenance, the 304 stainless steel layer handles the wet and high-touch tasks that fail fastest in ordinary cabinetry. Softer materials can then be used for warmth, proportion, and atmosphere without carrying the entire performance burden.

The specification covers a 190 sqm apartment, four practical zones, 304 stainless steel panel planning, planned drawer storage, and Blum storage hardware for long-term review.

Fadior whole-home stainless cabinetry supports vanity, wardrobe, and storage zones while respecting the different needs of each room.

The Milan apartment design coordinates wet and dry rooms using Fadior cabinetry.

FAQ

Frequently asked questions about this project.

Why use 304 stainless steel across kitchen and bath zones?

304 stainless steel protects wet, prep, vanity, and high-touch storage zones from water, heat, oil, grooming products, and repeated cleaning. It lets the demanding surfaces stay durable while the apartment still uses warmer panels and softer residential finishes. This gives the owner a clearer basis for comparing durability, storage, cleaning, and long-term service before approving final drawings.

What does wet-dry room continuity planning mean?

It means kitchen, bath vanity, wardrobe, and wall storage share proportion and material discipline, while each room keeps its own service logic. Water, cooking, grooming, towels, and storage are handled differently instead of being flattened into one decorative style. This gives the owner a clearer basis for comparing durability, storage, cleaning, and long-term service before approving final drawings.

Which specifications matter before fabrication?

Useful checkpoints include 304 stainless steel panel planning, planned drawer-load storage, Blum hardware, 304 stainless steel grade, food-contact standards for the kitchen, vanity moisture planning, service access, and a 30-year cabinet-body structural warranty (terms per contract). This gives the owner a clearer basis for comparing durability, storage, cleaning, and long-term service before approving final drawings.

Can a unified stainless apartment still feel warm?

Yes. The stainless layer can stay concentrated around wet and high-touch surfaces while warm champagne, matte taupe, walnut, fabric, and softer lighting define the visible mood. The home feels connected without asking one material to do every job. This gives the owner a clearer basis for comparing durability, storage, cleaning, and long-term service before approving final drawings.

Related projects

Reference projects related to Milan 190 sqm Kitchen Bath Apartment.

Other reference projects with similar material, program, or regional context.

Design Study

Proposed: 140 sqm

Apartment

Siena Compact Residence

Siena, Italy

Siena Compact Residence turns a 140 sqm Tuscan apartment into a 304 stainless steel storage study, using 1.2 mm sheet, 3 primary spaces, 120 kg load planning, 200,000-cycle fittings, 4 finish families, and a 30-year Fadior durability path.

Design Study

Proposed: 85 sqm

Apartment

Tokyo 85 sqm Kitchen Apartment

Tokyo, Japan

Tokyo 85 sqm Kitchen Apartment sets an 85 sqm home around 3 adaptable planning bands: cooking, dining, and visible storage. A 304 stainless steel kitchen specification uses 304 stainless steel panels and a 30-year cabinet-body structural warranty (terms per contract) to support daily change without a disruptive renovation.

Design Study

Proposed: 170 sqm

Apartment

Dubai 170 sqm Site-Adaptive Apartment

Dubai, UAE

This Dubai 170 sqm apartment kitchen uses Fadior 304 stainless steel to organize 3 practical zones around repeatable sink, pantry, laundry, and dining-service logic that can move between markets. The story is driven by site-adaptable luxury planning, with 1.4 mm panel planning, 70 kg drawer-load targets, 180,000-cycle storage intent, and a 20-year service position.

Keep exploring

Inquire about this project

Recreate this look in your space.

Send your details to the Fadior project team and we will scope a similar project for your home, hotel, or development. We reply within one business day.

Project consultation

Planning a project with the same level of detail as Milan 190 sqm Kitchen Bath Apartment?

Request kitchen bath continuity specs

Interior Designers

Browse finishes, layouts, and styling references for client presentations.

Book apartment material review

12 videos

See it on video

Short tours of finished Fadior homes and our Foshan showroom.

Kitchen videos from Fadior homes