
Muyu
FACCA055- Body
- 0.6 mm stainless steel Snowflake Satin body
- Size
- Base 1,000 × 500 × 450 mm; range W 700–1,200 × D 500–600 mm
- Top and basin
- 12 mm sintered stone with ceramic basin
- Mirror
- Mirror cabinet 1,000 × 150 × 700 mm

BATHROOM COLLECTION · 17 VERIFIED MODELS
A real collection of wall-hung bathroom vanities with moisture-resistant stainless steel bodies, ceramic basin pairings and stone surfaces selected for wet-room planning.
Seventeen real vanity models ↓01 · BATHROOM COLLECTION · 17 VERIFIED MODELS
Choose a compact powder-room footprint, a wider double-basin layout or a mirrored wall-hung arrangement. Sample-range sizes can be adjusted within the stated range; showroom-set sizes are fixed.
17 models shown

















Material boundary: the cabinet body uses moisture-resistant stainless steel construction, with grade confirmed per model on quotation. Ceramic basins, sintered-stone or luxury-stone tops, mirrors, LED frames, taps and drainage fittings follow their own specifications. A vanity is not a single-material product.
02 · Verified top and basin pairings
The collection uses the verified configurations below. The final basin, top, mirror, tap and waste set is confirmed on the project quotation.
3 models in this verified pairing
3 models in this verified pairing
1 model in this verified pairing
10 models in this verified pairing













03 · Wet-room engineering at the wall
The installation detail matters as much as the cabinet body: load-bearing support, concealed plumbing clearance and a protected wet-floor junction should be coordinated before fabrication.
04 · Care, ventilation and the site boundary
Non-swelling steel bodies resist bathroom humidity and splashes, while the room still needs correct sealing, ventilation and drainage. The site and care routine remains part of the result.
No. The cabinet bodies use moisture-resistant stainless steel construction, with the grade confirmed per model on quotation. Ceramic, stone, mirror, LED, tap and drainage parts have their own specifications.
Yes. Sample-range models can be adjusted within the stated width and depth range. Showroom-set models keep their listed fixed size.
The verified collection pairs ceramic basins with 12 mm or 80 mm sintered stone, 18 mm luxury stone, or an integrated ceramic top-and-basin.
Confirm the finished wall, support points, concealed P-trap route, service access, ventilation and drainage positions before the vanity set is released for fabrication.