What does a factory price actually cover?
Compare cabinet quantities, finishes and scope before choosing a 304 stainless steel kitchen order.
Factory-direct kitchen cabinetry is cabinetry ordered from a manufacturer against a measured layout and an agreed specification.
A search for factory price kitchen cabinet Singapore brings together very different purchases: a movable cupboard, fitted cabinet runs and a complete renovation. Start by choosing the purchase you need. A manufacturer can price a cabinet order clearly only when the room, components and responsibilities are clear.
For a Singapore home, record the base, wall and tall units separately. Add the worktop, sink, appliances and building work as named lines. The PRDT quotation comparison guide takes this specification-first approach. Our custom versus semi-custom cabinet guide helps you decide which dimensions genuinely need a bespoke fit.
- Per-foot-run quotation
- A per-foot-run quotation prices a stated length of cabinetry. Its meaning depends on whether base and wall units are counted separately or together, and on the specified height, depth and inclusions.
How should you compare per-foot and per-metre quotes?
Ask the supplier to mark each priced run on the same drawing. JS Carpentry’s published price list separates wall, base, full-height and island cabinets; Soon Teck’s kitchen price list describes a top-and-bottom kitchen rate. Those counting methods need different quantities.
JS lists wall units at approximately US$94–187 per foot and base units at US$101–164 per foot for its stated standard-finish scope. Its full-height definition is 2,500 mm and half-height definition 1,000 mm. Treat these as that supplier’s published references. Write your own cabinet heights and depths beside every rate.
For example, 10 ft of wall units and 10 ft of base units are two separate quantities when a quotation prices them separately. A per-metre cabinet offer, such as Living Solution’s customised cabinet listing, also needs the cabinet type, finish, worktop construction and site work defined before comparison.
Other makers’ package totals, material premiums and standard product dimensions stay outside our Fadior price calculation because they describe different cabinet schedules; use them to identify questions for your own measured quote.
Which costs belong outside the cabinet rate?
The worktop can change a comparison substantially. KIVO’s carpentry pricing guide gives quartz at approximately US$78–125 per foot, separately from its cabinetry example. Confirm the chosen slab, edge, joints, upstand, cut-outs and installation scope in your own quote.
Door profiles, drawer quantities, corner organisers, hinges and runners also deserve named specifications. Spend on the storage you reach every day, then simplify decorative features that add little use. Our kitchen fitting handover checklist explains what to record for moving parts.
For resale homes, obtain separate lines for dismantling, disposal, service changes and making good. For any flat or condominium, have the project team confirm building access and the applicable approval requirements before ordering. Keep the cabinet supply order and local trade responsibilities visible on the same scope sheet.
What should a Fadior quotation specify?
Fadior builds its cabinet bodies in 304 stainless steel at its Foshan factory. Select the doors, surface finishes and countertop as separate specification choices. This makes the body material clear while giving you freedom to choose a warmer painted or wood-look exterior. See the cabinet body and countertop distinction before comparing complete systems.
Use the following decision table with a Fadior designer. Each row turns a visual preference into something that can be checked on the order. Match the sample, drawing and written schedule rather than accepting a broad material label. The cabinet material duty map is useful when different parts of the room have different demands.
| Decision | Record on the quotation | Check before approval |
|---|---|---|
| Cabinet body | 304 stainless steel cabinet-body specification | Identify the units and their finished dimensions. |
| Door and visible finish | Named door profile, finish and approved sample | Compare the sample in your room’s light. |
| Worktop and sink | Surface, edge, joints and cut-out schedule | Match the selected sink and appliance drawings. |
| Hardware and storage | Hinge, runner and organiser specifications and quantities | Test the intended drawer and door openings. |
| Shipping and local works | Packing, freight and named local responsibilities | Agree who receives, moves and fits each component. |
How does the layout change your order?
A straight run is easy to describe, but a galley, L-shaped kitchen or peninsula introduces different openings and corners. First map the sink, hob, refrigerator and everyday preparation space. Then open the appliance doors and cabinet fronts on the drawing. The compact kitchen opening guide helps you test access without guessing a universal clearance.
In a compact apartment, use tall storage where it serves a real need, and give frequently used cookware an easy route from hob to drawer. Consider the custom pantry cabinet planning guide when a larder is part of the scope. Record islands and tall units separately, especially where a headline run rate covers only wall and base units.
Choose Shaker, flat-panel, painted or wood-look fronts for the room you want. Ask for the selected profile and finish sample together: an attractive reference photograph leaves the substrate, edge treatment and hardware unspecified.
What can a real Fadior home show you?
In a documented Fadior private residence in Foshan, a walnut-tone island stands between the working cabinets and a dining-room opening. White upper cabinets and darker lower storage form the perimeter. The island combines a 304 stainless steel cabinet body with wood-look fronts and a pale stone top.
That example gives a useful buying question: would a freestanding island improve circulation in your own room, or would an attached peninsula fit better? Mark the route around the island ends and the oven opening before adding the island to the quote. The photograph is a design reference for this decision; the published home supplies no comparable Singapore project price.
Use the example to describe your desired contrast and storage, then return to your measured plan. A clear design reference helps the factory understand the room while a component schedule keeps the commercial comparison precise.
When does a ready-made cupboard make sense?
A movable cupboard can be a sensible choice for extra dry storage or a rental home. FurnitureSG’s ready-made cabinet collection and IKEA Singapore’s cabinet listings show individual products with their own dimensions and prices. Compare the actual piece with the storage task and check its access route.
Individual retail prices, clearance discounts and rack dimensions are excluded from the fitted-kitchen budget because they purchase separate furniture pieces with different quantities and work scopes. Likewise, wardrobe, TV-console, mattress and whole-renovation package figures are outside a kitchen-cabinet-only comparison.
For a fitted kitchen, the attraction is a coordinated layout around the room and appliances. Keep that distinction when you compare a ready-made kitchen cabinet Singapore price list with a factory quotation. Use the cabinet door supplier checklist to specify fronts, and retain the body and worktop requirements alongside them.
How should you treat advertised lifespans and deadlines?
Time and performance need product-specific evidence. MRETTY’s bespoke pricing article, the SmartCalculator kitchen cost guide and T Se7en’s budget cabinet guide publish varied lifespan, hardware-cycle and material-performance comparisons. Their numerical lifespan estimates, cycle counts, climate-test figures and percentage savings are excluded here because they do not identify the agreed Fadior assembly or a supporting test for it.
Supplier-specific production weeks, retail delivery days, installation-day promises and warranty periods are excluded from the project programme because their products, local services and contract terms differ. Ask for a written sequence covering drawing approval, manufacture, shipment, receipt and local works for your own order.
Keep resale-return percentages, market forecasts and whole-renovation spending ratios outside the cabinet budget: the T Se7en replacement cost article discusses broader property and renovation outcomes, whereas this decision prices a defined cabinet order. Evaluate long-term value through maintainability, service access and the documented contract.
Bring these to your quotation discussion
- Measured layout and site photographs.
- Appliance model drawings and sink choice.
- Storage priorities and items to retain.
- Preferred door profile and finish reference.
How does Fadior supply a Singapore order?
Fadior cabinetry is assembled at our Foshan factory, packed and shipped to Singapore. Freight is quoted at the time of shipment. The cabinet-body structural warranty is 30 years; terms are per contract. Confirm the chosen doors, finishes, worktop, hardware and local responsibilities in the order.
The Fadior company and manufacturing overview explains the cabinet-body system. For your own kitchen, request the drawing set, finish sample, component schedule, care information and contract together. Discuss accessible plumbing, sound ventilation and timely leak repairs with your project team. The cabinet cleaning and care guide helps you plan the routine around the chosen surfaces.
Start your Fadior kitchen consultation with the floor plan, site photographs, appliance models and a list of what you want to store. Ask for the complete agreed scope and a clear total. That gives you a useful factory price for the kitchen you intend to buy.
Which factory-price kitchen questions do buyers ask most?
Use these answers to prepare a comparable cabinet order. Bring any unresolved counting, material or service question to the quotation discussion before approving the final drawing and schedule.
