Custom Cabinet Doors That Fit

What should you decide before ordering custom cabinet doors?

Order custom cabinet doors against a checked door schedule, with the finished size, opening method and finish agreed for every position. Start by deciding whether the existing cabinet bodies will stay. Their condition, layout and fixing points determine whether new fronts are a sensible update. Fadior cabinet proposals use 304 stainless steel bodies, with doors and decorative finishes specified separately.

Custom cabinet doors are fronts manufactured to an ordered size, profile and finish. They can refresh an existing kitchen or form part of a new cabinet system. Start with the room in our kitchen room planning examples, then mark the doors, drawer fronts, exposed ends and appliance panels you want to change. A coordinated elevation makes the small decisions visible before you buy.

Can you replace the doors and keep the cabinet bodies?

Check that the bodies are sound, securely fixed and arranged the way you want to use the room. Inspect the area around the sink, hinge attachment points, drawer operation and exposed cabinet ends. A new front changes the appearance; the retained structure still has to support the order. Ask a competent installer to assess anything loose, distorted or damaged. A drawer box and its visible front are separate order items; check each on the schedule. A complete cabinet’s external size and weight do not set replacement-front dimensions or hinge requirements.

Made-to-measure cupboard doors suit an update when the layout and underlying cabinets remain useful. A complete cabinet proposal suits a project that also changes storage, appliances or the room arrangement. Horizon’s door collection offers fronts for refacing and new cabinets, illustrating those separate purchase routes. For a Fadior proposal, ask us to confirm the requested supply and any existing-cabinet compatibility in writing through a custom cabinet project consultation.

How do you measure a replacement door correctly?

Follow the selected supplier’s measuring method. If the existing doors fit well and the overlay stays the same, record each finished door’s width and height separately. Label its location, opening side and matching drawer front. When working from cabinet openings, agree how the overlay or inset gap changes the final order size. Keep opening dimensions and finished door dimensions in clearly labelled columns.

The Cabinet Door Store’s measuring example uses a 12-inch-wide by 24-inch-high opening with a half-inch overlay to produce a 13-by-25-inch single door. Its paired-door calculation includes a separate centre gap. That example shows why opening size alone is insufficient. Check each supplier’s rounding increments and paired-door instructions, then have the final schedule reviewed before manufacture. A drawing or software door model helps communicate the design; the site measurements determine what fits. Nominal module sizes also differ from finished fronts: Customea’s 200 mm door is listed as 197 by 717 mm, with a 16 mm thickness.

Which door profile suits the room?

Choose the profile at the scale of a full cabinet run. Slab fronts make colour and alignment prominent. Shaker fronts add a framed rhythm; a narrower frame changes the balance between the edge and centre panel. Raised panels, mitred frames, applied mouldings, louvres and mullions create more visible detail. Look at tall doors and shallow drawer fronts together, because a profile can look quite different on each. Origin and recycled-content percentages describe sourcing; ordered dimensions and performance come from the selected component documents.

Omega’s door-style guide distinguishes slab, Shaker and raised-panel designs. Use a sample to judge depth, edge shape and colour beside your worktop. Consider how the same finish will meet adjacent rooms, including fitted laundry cabinet ideas. For timber or woodgrain fronts, specify grain direction and any matching across neighbouring panels. Browse photographed finished home interiors to study those relationships at room scale.

What changes when you select a material and finish?

Specify the face, core, reverse and edges rather than relying on a colour name. Solid timber, veneer, MDF, laminate, thermofoil and glass each describe different constructions or surfaces. Ask which finish arrives complete and which needs priming or painting. A painted sample should show the edge and back as well as the main face; a woodgrain sample should show the direction you intend to order.

Cabinet Doors ’N’ More describes a particular Shaker range with door thickness of 3/4 inch and different frame and insert materials. Those component dimensions belong to that range. For a Fadior project, identify the 304 stainless steel cabinet body independently from the selected door and worktop materials. Review our cabinet material information and ask for the documents covering your chosen assembly and finish.

Compare sheen using a sample. Sydney Doors labels its polyurethane choices as matt (10%), satin (30%), semi-gloss (60%) and high gloss (100%). Those finish labels help distinguish appearances; judge the actual selected sample in your room. Follow its maker’s cleaning and edge-care instructions.

What must the hinge and opening schedule include?

Record the hinge model, mounting arrangement, hole pattern and opening side for every door. Confirm whether factory boring is included and who checks its positions. Existing hinge locations can vary, even where adjacent doors look identical. An inset door sits within its opening; an overlay door covers part of the cabinet front. Half-overlay fronts share a cabinet division. Changing the opening method affects more than the visible profile. Eagle Woodworking lists size increments of 1/16 inch with a manufacturing tolerance of ±1/32 inch; ask about both when matching a retained run.

Cabinet Doors ’N’ More lists standard boring positions and says custom boring is unavailable for that offer. Confirm the current specification with the seller before placing an order. When a panel is large, glazed or unusually heavy, ask the supplier to select suitable hinges for that exact panel. Check the open position beside drawers, walls and appliances. Record handles, knobs or the agreed opening detail together with the fronts, then have the local fitter review the complete elevation. Cut My’s measuring guidance gives a 35 mm hinge-hole example with a 22.5 mm edge-to-centre offset, while noting that vertical spacing varies. Check the chosen hinge and every existing door.

How do glass fronts and matching panels affect the order?

Treat a glass-ready frame and its glazing as separate order items until the quotation confirms both. Agree the glass type, visible appearance, finished size, retention arrangement and fitting responsibility. Mullions divide the visible pane and change how objects inside the cabinet appear. Plan interior shelves and lighting with that view in mind, rather than adding a glass door after the storage has been fixed.

Fast Cabinet Doors’ glass-ready range describes custom dimensions, edge profiles and mullion options, with its wood frames supplied unfinished. Glass, mirror and sintered-stone faces keep their own material descriptions. Also schedule drawer fronts, filler pieces, end panels, plinths and appliance panels. Matching the fronts while leaving visible ends unresolved can make a carefully selected door look disconnected from the rest of the kitchen. Me and My Glass lists a 4 mm cut-to-size option. Ask the frame and glazing suppliers to agree the actual thickness, dimensions and fittings for your chosen assembly, including mirror or sliding fronts.

How much do custom cabinet doors cost?

Compare a complete, dimensioned order using the same finish and inclusions. A square-foot rate, a starting price per door and a full fitted-kitchen quote measure different purchases. At the time checked, Nieu’s US painted range lists Shaker fronts from US$85.24 per square foot. Fast Cabinet Doors lists an unfinished glass-ready Shaker frame from US$16.50 per square foot; the glazing and finishing scope differ.

The Cabinet Door Store illustrates a US$20-per-square-foot door with a 1.75-square-foot minimum: a 12 × 12 inch door costs US$35 under that example. Ask for the price of your actual schedule, including finishing, boring, fittings, packing, tax, freight and local fitting. Calculate the final quoted total, including any discounts or finance charges. Ratings describe reputation; your drawing and sample define the ordered front. Get a dated quotation for your selected doors rather than projecting those figures onto a different cabinet system.

What does a finished Fadior kitchen show about fronts?

Fadior’s open kitchen with a separate cooking kitchen pairs a grey-and-oak open kitchen with a darker enclosed preparation room. The photographs show how different front treatments can relate to their setting while the two rooms remain visually connected through a fluted-glass room door.

The cabinetry in that home has 304 stainless steel cabinet bodies, with fronts and worktops specified independently. The fluted-glass room door is a room divider, so order its specification separately from cabinet fronts. Our Fadior factory manufacturing information provides the factory context for a new cabinet proposal. Identify each room’s front schedule and sample in your trade cabinet project enquiry.

What should be approved before manufacture and shipment?

Approve a labelled elevation, final door schedule, finish sample and written quotation together. Include each panel’s size, opening side, boring instructions and quantity. Confirm who supplies glazing, hinges, handles and any finishing work. Modern Twig gives a 4–6 week example for its flat-packed fronts. Production, transit and fitting are separate stages, so ask for the production estimate and transport arrangements that apply to the agreed order, and identify the person responsible for fitting and checking the received pieces.

Fadior cabinets are assembled at our Foshan factory, packed and shipped to the destination. Freight is quoted at the time of shipment. Use our cabinet shipping information to prepare the handover questions. Fadior offers a 30-year cabinet-body structural warranty; terms per contract. A door-finish guarantee and a cabinet-body structural warranty cover different components; read the terms for the item you are buying. Keep the front and fitting terms in the order as well. You can explore more practical cabinet planning guides while preparing the drawings and finish references for your proposal.